DECORO-MINI Christmas Tree Ornament by YULE-GLO

Product Instructions & Safety Information

Product Overview:

The DECORO-MINI is a unique, 3D-printed Christmas ornament designed by YULE-GLO. It features a single LED for soft, ambient lighting and is powered by (3) LR44 coin-cell batteries, providing up to 20 hours of light. The ornament light has an integrated hook for easy hanging and maintenance (The hook is fixed to the ornament and should NOT be removed as it may break).This product is intended for indoor use only and is designed solely for decorative purposes. It is not a toy and should be kept out of the reach of children.

Important Safety Information:

  • Indoor Use Only: The DECORO-MINI is designed exclusively for indoor use. Exposure to outdoor elements may damage the product.
  • Care & Handling: To maintain the quality of the ornament, ensure your hands are clean when handling the DECORO-MINI to prevent dirt or oils from damaging the 3D-printed material.
  • Not a Toy: This product is meant for decorative purposes only. It is not a toy and should not be handled by children.
  • Battery Precautions: This product uses (3) LR44 coin-cell batteries. To avoid the risk of injury or damage:
  • Keep batteries out of reach of children. Coin-cell batteries pose a choking hazard and can cause serious internal injury if swallowed.
  • Follow proper disposal practices for coin-cell batteries in compliance with U.S. regulations (see below).
  • Battery Disposal: Coin-cell batteries must be disposed of in accordance with local and federal guidelines. Do not throw batteries in household trash or incinerate them. Look for battery recycling options in your area, or consult the U.S. Environmental Protection Agency (EPA) for more information.

  • Safety Standards: Batteries should be stored and handled carefully to prevent accidental ingestion by children. If a battery is swallowed, seek medical attention immediately!
  • DECORO-MINI Storage: The ornament should be stored in a cool, dry place to prevent heat and moisture from damaging the decorative decals. Remove batteries from the unit to avoid possible corrosion from the batteries within the LED light unit while in storage.  

Additional Product Notes:

  • Secure Construction: The DECORO-MINI is constructed with self-tapping screws. Do not attempt to remove the screws or top cap, as this may result in damage to the ornament or affect its overall structural integrity.
  • LED Light Output: As battery power decreases, expect minor fluctuations in LED brightness. Replace the batteries as needed to maintain optimal performance.
  • 3D-Printed Material: Due to the nature of 3D printing, slight variations in texture or finish may occur. These differences do not affect the product’s functionality.

By following these instructions, you can ensure the long-lasting use and enjoyment of your DECORO-MINI Christmas ornament for many seasons!

DECORO-MINI Operating Instructions:

  • General Operation: The simple design features an easy-to-push ON/OFF button; there is no timer function. Press the white button fixed to the top of the ornament to turn it ON; click again to turn it OFF.

Battery Replacement Instructions:

1. Prepare to Remove the Light:
Carefully remove the DECORO-MINI from your Christmas tree or ornament stand. Ensure that the ornament is switched off before handling.

2. Remove the LED Light Unit:

  • Hold the ornament steady, and using two fingers, gently slide the entire LED light unit out of the ornament. Do not twist or apply excessive force to avoid damaging the fasteners or light unit.
  • Set the ornament body aside once the light unit is separated.

3. Opening the Light Unit:

  • Place your thumbs on the top access ridge of the LED unit. Carefully pull the unit apart without twisting or using tools, which could damage the unit. Then, again, use two thumbs to open the bottom section of the light opening.

4. Battery Replacement:

  • Remove the used LR44 batteries and discard them following proper U.S. regulatory guidelines for coin-cell battery disposal.
  • Insert the replacement LR44 batteries, ensuring all batteries are placed with the + (Positive) side facing the spring and the - (Negative) side facing the switch. If the switch is becomes dislodged, push it gently back into place.

5. Reassembling the Light Housing:

  • Carefully close the light unit until you hear a soft click, ensuring that the unit is fully secured and locked.

6. Reinsert the Light Unit:

  • Align the light unit’s flat, square section with the ornament’s opening. Gently push the light back into place until it is fully inserted.

7. Enjoy Your DECORO-MINI:

  • Your ornament is now ready for use up to 20 hours of light. Note that as the battery life depletes, you may notice variations in the brightness of the LED.

If you have any questions or concerns, please contact us atinfo@yule-glo.com